![](/filedb/5/1/130815.jpg)
Those boards don't work ... unless you've got POWER!
A few months ago I purchased a a TRS-80 Model 1 off of eBay. The seller had listed it with a $400 Buy It Now and $40 shipping. It had been up for a long time, and I figured why not and made him an offer of $60 expecting to be ignored or rejected. A few hours later though I got an email saying the seller had accepted my offer. A TRS-80 with monitor for only $100 shipped! But it didn’t have a power supply. I was hoping I could figure out a workaround.
My cobbled power cable
I made myself a power cable to try hooking it up to my modified ATX bench power supply. The voltages that the TRS-80 wants as input are a little strange, it wants 19V DC and 17V AC. Unfortunately it needed more volts than my ATX bench supply provides, so I wasn’t able to get it to come up by feeding power into the TRS-80’s normal power jack. I opened the TRS-80 up and tried clipping in the power supply past the internal voltage regulators. The TRS-80 seemed to boot up, although it was hard to read. The HSYNC was broken. Replacing Z6 fixed the sync problem, but then I couldn’t get the computer to boot anymore.
Since I knew I was going to need an expansion interface in order to add an RS-232 port, I kept checking eBay occasionally for one. A few weeks ago *two* of them showed up. One said that it came with the RS-232 board, the other didn’t say, but had another TRS-80 and a floppy drive. The first auction with only the Expansion Interface and RS-232 card ended at close to $250. I didn’t really want to spend that much, so I didn’t win it.
After seeing how much the first auction had ended at, I knew I had no chance at the other one since it came with even more things. The auction ended late at night (around 11pm) and I happened to be awake when it ended. I kept getting notifications on my iPad from eBay about the auction ending and eBay encouraging me to bid higher so I don’t let it get away. Bummed I clicked over to my email and started deleting the messages from eBay when I saw eBay had sent me a message saying that I had won! And for under $200 shipped! Wow!
TRS-80 number two works!
When the Expansion Interface arrived with the other TRS-80 and floppy drive, it also had a single power supply dangling out of the Expansion Interface. I disconnected it and examined it to see if it had been cracked open for repair. It looked intact so I bravely plugged it in hoping the magic smoke wouldn’t come out (if you’ve been following me on Twitter you might have seen that’s been happening to me a lot lately). No smoke, but lots of humming from the AC, and testing with a multimeter the voltages looked correct. What the heck, I plugged in the new TRS-80 and hooked it up to my monitor, and the TRS-80 worked!
Since I only had a single power supply, I felt I had no way yet to test the Expansion Interface. I decided since I now had a known good working power supply, I should go back and try the original TRS-80 again to see if I could figure out what was broken. Using the working power supply I hooked everything up and turned on the TRS-80. It was working fine! Turns out I really hadn’t mangled the board when I swapped the single IC, it was just a problem with the way I was trying to power it up.
Anxious to find a way to hook up the Expansion Interface but having only a single power supply, I needed to find another way to power things. I went back to the TRS-80 schematic and carefully examined it, determined to find a way to power up the TRS-80 that didn’t require the original power supply with its AC voltage.
The AC voltage from the TRS-80 power supply immediately goes into a rectifier and is used to generate the +5V and -5V. Since it passes through a rectifier, it’s not really going to care if the voltage is AC or DC. The trick is that there needs to be a negative voltage coming in relative to ground. I had already tried using +5V and -5V as a substitute for the AC voltage but it didn’t work. I decided why not try +12V and -12V instead. With +12V hooked to pin 1 and 2, -12V hooked to pin 3, and ground on 4, I turned on the TRS-80. It worked! But running it that way meant I was making the components work a bit harder and put out more heat to generate the +/-5V.
I also have a variable DC power supply, but it only has two variable outputs and a fixed 5V output. In order to fire up the TRS-80 I need three voltages, and I already know that the 5V won’t be enough. I also need a negative voltage and the variable power supply only outputs positive voltages. Or does it?
I remembered there was a way to connect the two variable outputs in series to double the maximum voltage. Maybe I could put it in series mode and somehow center tap the new combined voltage? With the power supply into series mode and the master control set to 7V, I tested the voltage with my multimeter where the manual said to attach and saw that I was getting 14V. I then tried sticking the common side of the meter into the common jack that was intended only for the primary voltage source, and I was reading 7V. Moving the positive meter lead to the secondary voltage source’s common side, and I was getting -7V! Ok, but I still need +12V for the third voltage. Using the ATX bench supply for the +12V, I connected the common from the two power supplies together and I now had the three voltages I needed.
Linking two power supplies
I nervously connected both power supplies to the TRS-80 and turned everything on. It worked! Now curious about just how much voltage I need for positive and negative, I turned off the TRS-80, turned the voltage down so I was getting +/-6.5V and turned it back on. It still worked. I then tried +/-6.0V, but the video signal had a lot of dropouts. At +/-6.1V though both TRS-80s worked fine.
The challenge now is can I get a switching power supply that has the three voltages I need? Or if not, how can I make one? I tried searching the internet to see if I could find a reference design for a switching power supply that I could just alter slightly to get the voltages I need, but it seems like switching power supply is a dark magic and people aren’t willing to provide schematics. Lots of sites that would be happy to take you through a 2 year course on explaining how switching power supply design works, but I’m not really interested in learning a ton of theory just to make a power supply.
But my experiment shows that a heavy linear power supply using a large transformer (or in some cases *two* transformers) isn’t necessary to power the TRS-80. It doesn’t really want or need AC, it just wants a negative voltage input along with two positive voltages. I’ll keep researching to see if I can get a switching power supply that can provide the power necessary.
+1 Posted by George Phillips • Jun.13.2014 at 18.01 • Reply
While probably not exactly what you want, there is a design for a replacement Model I power supply using modern parts: http://www.trs-80.com/wordpress/zaps-patches-pokes-tips/zaps-model-i-power-supply/
+1 Posted by FozzTexx • Jun.13.2014 at 18.25 • Reply
Already very aware of that and that design requires two very large expensive transformers, which are not necessary. I want a switch mode power supply that only outputs DC and doesn't need those large transformers.
+1 Posted by Stefano Baron • Jun.21.2014 at 04.14 • Reply
I've bought a loose TRS-80 Model I on eBay as well. It's on route to Brazil... I've already got 3 DIN5 male plugs. Now I need to make a power supply, could you give some hints? Reading your article, I was not able to clearly understand what the 3 voltages. Is it +12v, +7 / -7 and ground ?
+1 Posted by Stefano Baron • Jun.23.2014 at 22.58 • Reply
So, as you propose, an alternative (and switching) power supply for the TRS-80 Model I should have 3 voltages: +12v DC, +6.5v DC, -6.5v DC, common ground?
+1 Posted by FozzTexx • Jun.23.2014 at 23.04 • Reply
Yes exactly. The +12v goes to the original DC pin, the +6.5v and -6.5v go to the AC pins. Obviously polarity does not matter for the two AC pins.
+1 Posted by Stefano Baron • Aug.16.2014 at 20.22 • Reply
Based on your findings and crossing with the original voltage range, what about using just +12v (DC) in the original DC pin and the same +12v plus -12v (in the two AC pins) ? This way, it could be done with a simple +12v/-12v/common ground power supply. THis power supply could be linear (with transformer) or even a switching power supply... Other way is removing/desoldering all the regulating circuit parts and putting jumpers to the DIN5 connector and using a modern PC small form ATX power supply. But I don't like messing with a 1977 design... let's keep it original.. Regards
+1 Posted by FozzTexx • Aug.16.2014 at 20.29 • Reply
Yep, as I wrote in the article, you can run it with just +12V/-12V. But that makes the whole thing run a lot hotter since it's having to dissipate a lot more of the voltage as heat.
+1 Posted by Rob O'Hara • Jan.11.2016 at 04.06 • Reply
Interesting post, and congrats on getting the Model I up and running. It's amazing how much work goes into keeping these old machines from not that long ago up and running.
+1 Posted by tuhginult • Aug.29.2021 at 04.41 • Reply
http://buytadalafshop.com/ - cialis buy
+1 Posted by injuche • Aug.31.2021 at 08.39 • Reply
https://buystromectolon.com/ - ivermectin price
+1 Posted by Dyecync • Sep.05.2021 at 19.18 • Reply
<a href=http://buysildenshop.com/>Viagra</a>
+1 Posted by Endeado • Sep.07.2021 at 02.44 • Reply
http://buysildenshop.com/ - Viagra
+1 Posted by jillirm • Sep.07.2021 at 04.08 • Reply
<a href=http://buystromectolon.com/>Stromectol</a>
+1 Posted by LiffAllen • Sep.07.2021 at 04.36 • Reply
<a href=https://buytadalafshop.com/>cheapest cialis</a>
+1 Posted by LiffAllen • Sep.07.2021 at 07.33 • Reply
<a href=https://buytadalafshop.com/>Cialis</a>
+1 Posted by RoammaTah • Sep.07.2021 at 20.31 • Reply
https://buypropeciaon.com/ - Propecia
+1 Posted by RoammaTah • Sep.07.2021 at 22.10 • Reply
http://buypropeciaon.com/ - dr reddy finasteride buy
+1 Posted by Tinteld • Sep.08.2021 at 04.57 • Reply
<a href=http://buypropeciaon.com/>finasteride prescription floroda</a>
+1 Posted by Dyecync • Sep.09.2021 at 04.47 • Reply
<a href=http://buysildenshop.com/>Viagra</a>
+1 Posted by Endeado • Sep.09.2021 at 10.02 • Reply
https://buysildenshop.com/ - best viagra price
+1 Posted by injuche • Sep.10.2021 at 00.44 • Reply
http://buystromectolon.com/ - ivermectin dosage for humans
+1 Posted by Propecia • Sep.10.2021 at 22.39 • Reply
how much is levitra
+1 Posted by tuhginult • Sep.11.2021 at 16.20 • Reply
http://buytadalafshop.com/ - generic cialis for sale
+1 Posted by Stromectol • Sep.12.2021 at 01.55 • Reply
que es cialis yahoo
+1 Posted by Lasix • Sep.15.2021 at 15.09 • Reply
Propecia Princesa
+1 Posted by PeneSuego • Sep.16.2021 at 05.00 • Reply
http://buyplaquenilcv.com/ - Plaquenil
+1 Posted by PROMCERRY • Sep.18.2021 at 17.47 • Reply
https://buypriligyhop.com/ - Priligy
+1 Posted by CulleyGes • Sep.21.2021 at 08.19 • Reply
<a href=http://buyplaquenilcv.com/>plaquenil for corona virus</a>
+1 Posted by CulleyGes • Sep.21.2021 at 12.35 • Reply
<a href=https://buyplaquenilcv.com/>plaquenil medication</a>
+1 Posted by Unibile • Sep.21.2021 at 14.10 • Reply
<a href=https://buypriligyhop.com/>buy priligy without a script</a>
+1 Posted by Plaquenil • Sep.21.2021 at 16.17 • Reply
Amikacin
+1 Posted by Unibile • Sep.22.2021 at 00.35 • Reply
<a href=https://buypriligyhop.com/>better business bureau online pharmacy priligy</a>
+1 Posted by Plaquenil • Sep.22.2021 at 00.49 • Reply
Levitra Generika Aus Deutschland
+1 Posted by sillepism • Sep.22.2021 at 07.31 • Reply
https://buyzithromaxinf.com/ - buy zithromax from canada
+1 Posted by sillepism • Sep.22.2021 at 09.18 • Reply
https://buyzithromaxinf.com/ - zithromax z pac
+1 Posted by ododemant • Sep.22.2021 at 17.47 • Reply
<a href=http://buyzithromaxinf.com/>zithromax for sinus infection</a>
+1 Posted by Zithromax • Sep.23.2021 at 01.41 • Reply
Dove Posso Comprare Il Cialis Generico
+1 Posted by Indinge • Sep.23.2021 at 07.32 • Reply
<a href=http://buylasixshop.com/>Lasix</a>
+1 Posted by PROMCERRY • Sep.23.2021 at 08.54 • Reply
https://buypriligyhop.com/ - walmart priligy
+1 Posted by Priligy • Sep.24.2021 at 02.07 • Reply
Zithromax Children
+1 Posted by Empaphy • Sep.24.2021 at 11.07 • Reply
https://buylasixshop.com/ - side effects of lasix
+1 Posted by Priligy • Sep.24.2021 at 23.05 • Reply
buy levitra no prescription
+1 Posted by Zithromax • Sep.25.2021 at 17.44 • Reply
Vente Viagra Lyon
+1 Posted by Empaphy • Sep.25.2021 at 18.19 • Reply
http://buylasixshop.com/ - lasix for dog without prescription
+1 Posted by Indinge • Sep.25.2021 at 20.26 • Reply
<a href=https://buylasixshop.com/>Lasix</a>
+1 Posted by PeneSuego • Sep.26.2021 at 00.17 • Reply
https://buyplaquenilcv.com/ - plaquenil reviews
+1 Posted by Neurontine • Oct.01.2021 at 12.24 • Reply
Cheap Unisom
+1 Posted by invoisymn • Oct.08.2021 at 02.05 • Reply
http://prednisonebuyon.com/ - non prescription prednisone
+1 Posted by invoisymn • Oct.08.2021 at 03.44 • Reply
https://prednisonebuyon.com/ - is prednisone a steroid
+1 Posted by EAGERYMEK • Oct.08.2021 at 07.00 • Reply
<a href=https://prednisonebuyon.com/>Prednisone</a>
+1 Posted by Prednisone • Oct.08.2021 at 11.46 • Reply
Reaction To Amoxicillin And Mononucleosis
+1 Posted by Adjurce • Oct.08.2021 at 20.58 • Reply
<a href=https://buyneurontine.com/>Neurontine</a>
+1 Posted by Zeptinili • Oct.10.2021 at 11.10 • Reply
http://buyneurontine.com/ - Neurontine
+1 Posted by Prednisone • Oct.10.2021 at 23.11 • Reply
Cialis Viagra Panorama
+1 Posted by Adjurce • Oct.11.2021 at 21.09 • Reply
<a href=http://buyneurontine.com/>gabapentin for anxiety</a>
+1 Posted by Zeptinili • Oct.12.2021 at 04.18 • Reply
https://buyneurontine.com/ - gabapentin controlled substance
+1 Posted by diemiat • Oct.30.2021 at 10.36 • Reply
<a href=https://asildenshop.com/>Viagra</a>
+1 Posted by HulficT • Oct.31.2021 at 00.31 • Reply
<a href=https://stadalafilop.com />order cialis</a>
+1 Posted by Scouckhok • Nov.04.2021 at 08.04 • Reply
<a href=https://abuypriligyhop.com/>paxil or priligy</a>
+1 Posted by LeseDeeni • Nov.04.2021 at 16.14 • Reply
<a href=http://atadalafishop.com/>Cialis</a>
+1 Posted by LeseDeeni • Nov.04.2021 at 19.56 • Reply
<a href=https://atadalafishop.com/>Cialis</a>
+1 Posted by crasesege • Nov.06.2021 at 02.09 • Reply
<a href=https://astromectoli.com/>Stromectol</a>
+1 Posted by chammalse • Nov.06.2021 at 12.29 • Reply
<a href=http://abuypropecian.com/>Propecia</a>
+1 Posted by fogielo • Nov.06.2021 at 14.13 • Reply
<a href=http://vsildenshop.com/>Viagra</a>
+1 Posted by crasesege • Nov.06.2021 at 23.51 • Reply
<a href=https://astromectoli.com/>ivermectin paste</a>
+1 Posted by Scouckhok • Nov.08.2021 at 08.38 • Reply
<a href=http://abuypriligyhop.com/>priligy ebay</a>
+1 Posted by HulficT • Nov.08.2021 at 16.50 • Reply
<a href=https://stadalafilop.com />Cialis</a>
+1 Posted by fogielo • Nov.09.2021 at 09.59 • Reply
<a href=http://vsildenshop.com/>viagra after prostate cancer</a>
+1 Posted by satisfaction • Nov.09.2021 at 12.55 • Reply
Keflex For Bronchitis
+1 Posted by smimicymn • Nov.10.2021 at 16.50 • Reply
<a href=http://aprednisonen.com/>Prednisone</a>
+1 Posted by enurgibre • Nov.10.2021 at 22.53 • Reply
<a href=http://abuylasixshop.com/>furosemide side effects</a>
+1 Posted by smimicymn • Nov.16.2021 at 03.01 • Reply
<a href=https://aprednisonen.com/>Prednisone</a>
+1 Posted by Peaburi • Dec.19.2021 at 01.12 • Reply
<a href="http://abuyzithromi.com ">maxifort zimax 100 mg</a>
+1 Posted by aquadcari • Dec.19.2021 at 18.17 • Reply
<a href="http://vpropecian.com ">propecia success</a>
+1 Posted by Vittand • Jan.24.2022 at 00.17 • Reply
psydrissamma <a href=https://www.alevitrasp.com>prix acheter levitra</a>
+1 Posted by infania • Jan.26.2022 at 05.43 • Reply
Buy Original Propecia <a href=https://aprednisonen.com/>otc prednisone</a>
+1 Posted by infania • Jan.27.2022 at 01.24 • Reply
<a href=https://aprednisonen.com/>prednisone 6 day dose pack</a> Nzhdpq cm usu ally do pass spontaneously.
+1 Posted by orammaGow • Jan.27.2022 at 11.39 • Reply
Vyvvly ante <a href=https://abuyplaquenilcv.com/>Plaquenil</a> viagra sin receta levitra
+1 Posted by orammaGow • Jan.30.2022 at 12.46 • Reply
Acheter Airomir <a href=http://abuyplaquenilcv.com/>Plaquenil</a>
+1 Posted by orammaGow • Feb.09.2022 at 08.21 • Reply
<a href=http://abuyplaquenilcv.com/>Plaquenil</a> One profitable sideline was charging the public to view these inmates and their antics.
+1 Posted by orammaGow • Feb.13.2022 at 21.56 • Reply
<a href=http://abuyplaquenilcv.com/>hydroxychloroquine for lupus</a> Sezmqb The angular veloc ity see Appendix A is then v max max where is the length of the leg.